Vibrating source of seismic signals SVS-30/120 TSV

Vibrating source of seismic signals SVS-30/120 TSV

Technical characteristics

Vibration exciter

  • Nominal pushing force, kN: 300.
  • Deviation from the pushing force from the nominal one in the frequency range 15-130 Hz, dB: ±3.
  • Reaction mass, kg: 4500.
  • Active mass, kg: 3100.
  • Piston surface area, cm2: 145,4.
  • Full stroke, mm: 84.
  • Operating frequency range, Hz: 5-250.

SERVO VALVE ATLAS 200H or PEG-350DA

Baseplate

  • Area, m2: 2,90.
  • Dimensions, cm: 240x120x24.
  • Static pressing, kg: 31 000.

Hydraulic system

  • Drive engine is shared with the main one YAMZ-7511.
  • Engine power, l/sec at 2100 rpm 400.
  • Hydraulic pump DENISON P14P3R1A4A2A (USA).
  • Maximum flow rate, l/min. at 2100 rpm 460.
  • Tank capacity, l 350.

Control system

Companies Pelton, Sersel, or any other at the request of the customer.

Transport database

  • General description: four-track snow-and-swamp going chassis with independent suspension and flexible tracks that ensure constant contact with the ground and perception of shock loads.
  • Engine: YAMZ-7511 with preheating system. Power 400 l/sec.
  • Transmission: hydrostatic (pump-motor by "Sauer").
  • Steering: constant power control of two double-acting hydraulic cylinders on each bogie with a hydraulic synchronizer.
  • Tracks: rubber-metal sheet with metal ground hooks.

Technical characteristics

  • Dimensions: 11,500 x 3,960 x 3,800 (length x width x height in meters).
  • Total weight: 35 tons.
  • Radius of turn: no more than 11,5 meters.
  • Average specific load on the ground: no more than 0.18 kgf / cm2.
  • Maximum speed: 20 km/h.
  • Gradeability:
    longitudinal: no more than 300;
    transverse: no more than 100.
  • Ford: 2 meters.
  • Fuel reserve: tank of 950 liters.
  • Plate clearance: at least 600 mm.

 

Vibrating source of seismic signals SVS-30/120 TSV

 

Vibrating source of seismic signals SVS-30/120 TSV

 

Vibrating source of seismic signals SVS-30/120 TSV